Olight S15-Ti Titanium Cree XM-L2 LED Limited Edition

฿2,490.00
Price in points: 2490 points
OLS15TI
+
Add to wish list

Description

The S15-TI Baton is a very small, powerful LED flashlight featuring an intelligent multi-function side switch and powered by a single commonly available and economical AA battery.

You can also make it a rechargeable by inserting a Nickel–metal hydride or lithium-ion rechargeable battery.

The pint-sized S15-TI is easy to keep on hand wherever you go, and is now offered in Titanium and comes in a smooth-polished (2000 units) or bead-blasted (1200 units) finish. Its top-ofthe-
line CREE XM-L2 NW LED puts out an impressive 260 lumens of soothing, warm-colored light, with a total of four different power settings and a strobe mode. The versatile S15-TI has a lock-out function to prevent inadvertent activation and a magnet in the flat tail cap to allow you to go hands free when needed.

Features

  • Multi-function side switch with four brightness levels from 0.3 to 260 lumens, plus a strobe mode
  • Memory function to remember the last power setting used, along with quick access directly to the brightest   level and a lock-out mode to prevent accidental activation
  • Latest top-of-the-line, highest-performing, single-die CREE XM-L2 NW LED provides soothing warm-colored   light for truer color representation at night
  • If you choose to use a single ALKALINE or NIMH the flashlight will produce three levels of brightness,  7 lumens, 120 lumens, and moonlight mode. If you choose to use a single rechargeable Li-ion it will    produce four levels of brightness they are 7 lumens, 80 lumens, 260 lumens, and moonlight mode.
  • Titanium body construction that is lightweight and corrosion resistant with a stainless-steel pocket clip
  • Two finishes available: smooth polished or bead blasted
  • Flat tail cap with strong magnet to secure to ferrous surfaces
  • Reverse polarity protection to prevent improper battery installation and thermal management to  avoid overheating
  • Extremely low standby current resulting in nominal battery drain when not being operated (0.5uA while    using 1.5V battery; 1.2uA while using 4.2V battery)

Specificication

  • 1 x Cree XLamp XM-L2 NW
  • Tough ultra-clear tempering glass, with anti- reflective coating
  • Titanium body construction that is lightweight and  corrosion resistant
  • Battery 1x AA 1x NIMH 1x Lithium-ion
  • Length: 3.38 in / 86mm Bezel Diameter: 0.91 in / 23mm
  • Weight: 1.62oz / 63g (excluding batteries)

Package included

  • Spare O-rings x2 (included) 
  • Silicone pad  x1 (included)

No posts found

Write a review